In order to avoid unnecessary waste of time and mass production process, we really need patience to adjust and manipulate various process conditions, find out the best conditions of temperature and pr
We have used a lot of methods in the customized pouring of injection moulds. According to the type of casting system, the mould can be divided into three categories:(1) Warm runner die: This die struc
In the process of customized injection moulding, because of the poor exhaust condition of injection moulds, water vapor, voids, volatile gases of volatile substances and data decomposition gases in th
There are many factors affecting the cooling of injection mould, such as the shape of plastic parts and the planning of the parting surface, the variety, temperature and flow rate of cooling medium, t
First of all, we must look at the structural disorder of this kind of mould. Generally speaking, it takes about a month to open a set of injection moulds. Chaotic moulds take longer. Usually an inject
Many injection moulding products will smell bad in the process of processing, and users will feel uncomfortable. So what if Ann avoids this situation in the process of injection?1. Strictly control th
First of all, it should be distinguished from information and planning.The most important point of injection mold customization is information, so what kind of information is good? Of course, the hard
Cute Products Industial Co.,Ltd.
Address: 6/F,Sitoy Tower,No.164 Wai Yip StreetKwun Tong,Kin,Hong Kong.
Tel: (852)25258477 24168008
Fax: (852)28452781 24134817
Copyright © 2019 Jiangmen Zhi Qu Metal Plastic Ind.Co., Ltd. Technical Support：Jiangmen website construction